Calibration Instruments

1. It can check all kind of electric measurement .
2. It can as a voltage , Current , Power source for high precision & high stability standard resource

1. Easy just type in number operation
2. Beeper warning when output is open
3. It is very accurate
4. 0-100% output set up & down

1. It is provides an accurate , reliable and economic solution for wide range of pressure
2. The product is unique structure and it is extremely easy to operate

1. Source and measure at the same time
2. Measurement of DC mA , DC V and temperature
3. 11 types of thermocouple selection

1. Calibrate temperature of 11 types of  theromocouple
2. DMM 24000 Counts
3. Source and measure simultaneously
4. Selectable HART 50ohm resistor to faciliate use with HART communication device.

1. Light weight & slim , yet large easy to read battery power gauge make them easy to carry and read
2. Highest accuracy 

Features:

• Precision pressure measurement from ±10 inH2O/20 mbar to 10,000 psi/690 bar
• Absolute pressure measurement ranges 15, 30, 100, 300 psia
• Accuracy to 0.05 % of full scale
• Reference class gauge accuracies to 0.04 % of reading
• Easy to use, rugged construction for reliable performance
• CSA; Class 1, Div 2, Groups A-D rating
• ATEX rating: II 3 G Ex nA IIB T6
• Combine with the 700PTPK or 700HTPK pump kits for a complete pressure testing solution for up to 600 psi (40 bar) with the PTP-1 pneumatic pump and up to 10,000 psi (690 bar) with the HTP-2 hydraulic pump
• Log up to 8,493 pressure measurements to memory (requires 700G/TRACK software)
• Three-year warranty

The Series 477AV Handheld Digital Manometer is now available with pressure, flow, and velocity measurements along with a number of other convenient features. The built-in air velocity and flow calculations provide accuracy and conserve time and error associated with manual calculations. Also featured on this unit are adjustable zero and span values for calibrating in the field, as well as a damping feature to compensate for the fluctuating of readings.

Features/benefits:

• Calculates and displays air velocity and volumetric air flow
• Rugged aluminum case protects instrument from damage during transport/use
• 9 selectable English and metric engineering units
• Large, easy to read display with backlight for use in dark areas
• Stores up to 40 readings with minimum, maximum and average statistics

Applications:

• Air flow monitoring
• Duct static pressure

“SANSEL” series TCAL 1501 / 600 is a micro controller based precision “DRY BLOCK” temperature calibrators generates true reference temperature. The temperature controller of the calibrators uses a auto tune FUZZY PID controller algorithm. This response closely follows the heating curve of an actual thermal system. Place the Thermocouples, RTDs - type (PT 100, K, R, S, B, etc.) to be calibrated in the calibrator. Set the temperature from the 4.3 inch true TFT display with touch screen. Both Block and set temperature can be read. When stabilization occurs, Simply read the temperature and re-calibrate the Thermocouples, sensor etc,. or comparison with master Thermocouple / RTDs reading.

Applications in:

• Energy - Production and Energy -Distribution Sectors
• Glass, Ceramic, Semi Conductor Industries
• Steel Material Processing Industries
• Calibrators laboratories etc,.